Skip to product information
1 of 13

Be Ready!

TacBox FS (Large) - Full Size to SubCompact Handgun Mountable Fast Access Holster Box

Regular price $20.99 USD
Regular price Sale price $20.99 USD
Sale Sold out
Tax included.
Size
Color
TacBox FS Large Design ( 7" Long)
  • Designed to fit 1 Semi-Auto Handgun and 2 Magazines
  • Use for Fast Access Mounted Holster or Long Term Storage
  • Foam insert for secure protection of your expensive gear
  • For use in Vehicles, Home / Office, Gunsafes, etc.
  • Connect any combination of boxes for the perfect custom storage solution
  • Multiple Mounting Options: Base or side via adhesive or screws
  • Fit:  FS10 fits Semi-Automatic Pistols over 1 Inch wide, FS20 fits Semi-Auto Pistols between 3/4" and 1" Wide
  • Size: 7.0 Long x 2.25 Wide x 5.25 Tall (Inches)
  • Materials: Injection-molded high-strength ABS plastic outside; urethane foam insert inside


Customizing and Mounting:

The TacBox is designed to be customized and mounted in multiple ways to fit your specific needs:

  • Gun Fit: Choose the size TacBox FS that fits your gun. Each TacBox includes foam spacers that can be trimmed to adjust the resting height of the gun and magazines. Just trim each spacer with a scissors until they sit at the preferred height.
  • Pro Tip: If you would like a tighter fit for your specific gun, place a strip of foam tape on the inside of each side of the TacBox. This will compress in the foam resulting in a more firm fit.
  • Adhesive-mounted: The included 3M double-sided tape is most commonly used, for a semi-permanent bond with smooth hard surfaces including plastic and metal
  • Screw-mounted: Wood or sheet metal screws can be used on the TacBox to secure it more permanently to the surface of your choosing. Mounting holes located on the sides and base of the TacBox

And for more configuration options, be sure to check out:

TacBox FS Connector Bar: This custom-manufactured connector bar lets you snap two TacBox FS units together quickly and easily.

 TacBox FS Decorative Plugs:  Finish the look of your TacBox. These snap in decorative plugs fill the side mounting holes when not in use. 

 Included in Package:

(1) TacBox FS Enclosure Box
(1) TacBox FS Enclosure Cap
(1) TacBox FS Foam Insert (set)
(2) 3m Professional Double Sided Adhesive Tape Pads and Cleaning Wipes

Customer Reviews

Based on 7 reviews
71%
(5)
0%
(0)
14%
(1)
0%
(0)
14%
(1)
D
Dean Keating
Cheaply made

The top that snaps on to the base is very flimsy and doesn’t snap in place very easily. The foam is super tight to put the pistol in. You have to take it all apart and work the gun into place in the foam to get it to fit in, it just bunches up and can’t get the pistol in. After you take it apart and work the gun into the foam you have to take the gun out and snap the top back on and good luck fitting it back in. Also the cut out for the trigger is too small for a full size pistol. I had to cut slot wider to even fit the pistol in. Will not buy this again

w
wayne
NG on glocks with lights

needs physical modification to handle glocks with lights

D
Danny Schooling
The fc

The fc magazine holder was to small for my glock 43 mag

D
Dean Vollette
JUST WHAT I NEEDED

Having a handgun presents certain carrying issues. But in the car my fast access holster box is the right fit. Mount it and use it. I will.

M
M
Fast secure & simple

Used with the magnet option, provides easy access. Have mounted in safe and can quickly be removed and mounted in center console of vehicle.

Customer Reviews

Based on 7 reviews
71%
(5)
0%
(0)
14%
(1)
0%
(0)
14%
(1)
D
Dean Keating
Cheaply made

The top that snaps on to the base is very flimsy and doesn’t snap in place very easily. The foam is super tight to put the pistol in. You have to take it all apart and work the gun into place in the foam to get it to fit in, it just bunches up and can’t get the pistol in. After you take it apart and work the gun into the foam you have to take the gun out and snap the top back on and good luck fitting it back in. Also the cut out for the trigger is too small for a full size pistol. I had to cut slot wider to even fit the pistol in. Will not buy this again

w
wayne
NG on glocks with lights

needs physical modification to handle glocks with lights

D
Danny Schooling
The fc

The fc magazine holder was to small for my glock 43 mag

D
Dean Vollette
JUST WHAT I NEEDED

Having a handgun presents certain carrying issues. But in the car my fast access holster box is the right fit. Mount it and use it. I will.

M
M
Fast secure & simple

Used with the magnet option, provides easy access. Have mounted in safe and can quickly be removed and mounted in center console of vehicle.

  • Free Shipping

    Delivery is on us for all orders over $50

  • Made in the USA!

    All Design, Manufacturing and Assembly of the TacBox is Proudly performed in Dayton, Ohio, USA

  • Money Back 100% Guarantee

    Love it, or receive a full refund on all purchases